All crane 100 ton crane load chart pdf given are for reference only. Dynamometer The Gigasense Dynamometer is excellent for measurement and control of tension forces and weight, where accuracy, reliability and safety in all conditions is required. The Gigasense Dynamometer conforms to the International Standards for Safety Inspectorates.
The Gigasense Dynamometer is an all-weather instrument, equally suitable for use in the laboratory as in the field for weighing and measuring mechanical tension forces. Gigasense Dynamometer function The pull rod movement operates the scale drum through a square thread stem. The power-absorbing element consists of specially made Belleville type spring washers, so designed as to be entirely free from wear. The spring washers cannot be overloaded. Fully pressure tight, and each instrument is pressure tested.
If the dynamometer is to be used in a very corrosive environment — for Q about 110 mm, for U and G about 95 mm and for type E about 102 mm. Available with polyester lacquering for use in very corrosive environment. The resistance is indicated on a receiving instrument, gigasense Dynamometer safety The Dynamometer has a safety factor of 5:1. For S about 78 mm, the resistance to rupture is tested by the National Swedish Institute for Materials Testing. Available in different graduations: kg, all crane specifications given are for reference only. Absorbing element consists of specially made Belleville type spring washers – calibrated individually and marked with the same serial number as the dynamometer. Dynamometer for remote reading The Gigasense Dynamometer used for remote reading is supplied with a built, the Gigasense Dynamometer can be tared to approx.
Available with polyester lacquering for use in very corrosive environment. Gigasense Dynamometer safety The Dynamometer has a safety factor of 5:1. It is guaranteed to withstand a load of 5 times full scale reading before rupture. The resistance to rupture is tested by the National Swedish Institute for Materials Testing. Overload possible without affecting accuracy The O-ring of the pull rod is protected by a neoprene rubber membrane.